Appliance Parts Stony Plain – Buy the Part and Fit It Yourself
Genuine and aftermarket appliance parts for Stony Plain. One part, no account and no minimum order, identified from your model number and held at our Edmonton counter.
Appliance Kingdom · 9058 51 Ave NW, Edmonton
Where Your Model Number Is Hiding
The model number is the one piece of information that makes a parts order accurate. Every appliance carries it on a plate or sticker, tucked somewhere out of sight.
Send us a photograph of the plate. Reading it out over the phone is where mistakes creep in, because the numbering mixes characters that sound and look alike.
Start With What the Appliance Is Doing
Ten complaints we hear regularly and the components usually behind them. A starting point for the phone call rather than a diagnosis.
More than one component can produce any of these, so this narrows the field instead of closing it. Give us the model number and describe exactly what happens, and we will settle on the right part before you pay for anything.
The Parts Desk That Serves Stony Plain
Our parts desk is at 9058 51 Ave NW in Edmonton, sharing a building with the appliance showroom and the service workshop. Genuine and aftermarket components for washers, dryers, refrigerators, freezers, ranges, dishwashers and microwaves are held or sourced there, across every major make.
There is no minimum order and no account required. One thermostat is a perfectly normal purchase. Phone or email the model number with a short description of the fault, and we will confirm the component and put it aside before you set off.
Stony Plain is well supplied with repair companies, several of them long established, and they will happily order a component in and fit it. What the town does not have is a parts desk you can walk up to. If you would rather do the work yourself, or you simply want to know what the part costs before agreeing to a repair, the counter in Edmonton is the place to ask. We will also tell you when a job is not worth doing yourself, which is the section below.
How Difficult Is the Job, Honestly
Not every repair is a weekend project and not every repair needs a technician. Before you order anything, it helps to know which category your job falls into.
Ten-minute swaps, no tools
Fridge water cartridges, range hood grease and charcoal filters, shelves and crisper bins, drip bowls, knobs, light bulbs and vent hoses. If you can open the door you can fit these.
Anyone can do theseAn hour with basic tools
Dryer belts, drum rollers and glides, door seals and boots, lid switches, dishwasher rack parts and most drain pumps. A screwdriver, a socket set and a video will usually see you through.
Unplug it firstElectrical work, isolate the power
Heating elements, thermostats, thermal fuses, door locks, igniters and control boards. Straightforward enough mechanically, but the appliance must be disconnected and you need to be sure of the diagnosis.
Confident with a multimeterSealed systems and gas, call a technician
Compressors, refrigerant lines, evaporators and gas valves. We can supply these components, but fitting them needs certification and the right equipment. We will say so rather than take the sale.
Not a DIY jobMeasure before you order
Oven door glass, shelving, hinges, handles and trim vary between models that look identical. Send the model number and, where it helps, a measurement, and we will check it against the diagram.
Model number decidesGenuine Against Aftermarket, and What It Means for You
Two versions exist for most components. The sensible choice changes with the part and with how much longer you want the appliance to last.
Genuine parts
Produced by the appliance manufacturer or to their specification, and matched to the model number on your plate.
- No adaptation needed, it simply fits
- Our recommendation for boards, sensors and anything sealed
- The dearer of the two
Aftermarket parts
Made to cover a family of models rather than one machine. We are an authorised Supco dealer, a name in aftermarket components since 1945.
- A real saving on the same repair
- Routine for elements, thermostats, belts, hoses and capacitors
- Not available for every component, and we will tell you when
Ninety days on the part, every time
One term, applied to everything that leaves the desk. Genuine or aftermarket, a control board or a drip bowl, in stock or ordered in for you: ninety days from purchase, printed on the receipt.
Brands Covered at the Desk
The parts range extends well past the appliances we sell. Whirlpool, Samsung, LG, Maytag, Inglis and Kenmore machines are common in Stony Plain kitchens and we supply components for all of them regardless of whose dealer we happen to be. Tiles that link through have a page on our site.
Accounts for Repair Companies and Property Owners
Three groups use the desk on different terms, and it is worth knowing which applies to you.
Trade accounts are open to appliance service businesses. Give us the model and the component and we will confirm what is available and roughly how fast before you quote your customer.
If maintenance is handled in house, an account replaces retail pricing on the parts that keep failing across the same units.
No account, no minimum, no questions about why you only want one part. Bring the model number or the old component and we will match it at the desk.
Appliance parts pages: Lethbridge, Calgary and Edmonton. Looking for a whole machine instead? See our appliance pages.
Asked and Answered, Stony Plain
Can I buy a single appliance part, or is there a minimum?
A single part is fine. No account, no minimum order and no membership. Call 780-498-7273 or email with the model number and we will confirm the price and put it aside for collection.
Is there an appliance parts desk in Stony Plain?
Not a walk-up counter, no. The town has several well-established repair companies who will order a part in and fit it, but if you want to buy the component yourself the nearest desk with the full range is ours in Edmonton.
How do I know whether I can fit the part myself?
That is what the difficulty section on this page is for. Filters, shelves and vent hoses are genuinely ten-minute jobs. Belts, seals and pumps need basic tools and an hour. Anything touching a sealed refrigeration system or a gas valve needs a certified technician, and we will say so plainly rather than sell you a part you cannot safely fit.
What information do you need to find the right component?
The model number from the plate, plus a description of what the appliance does wrong. Photograph the plate and send it through. Our suppliers give us the manufacturer parts diagram for your machine, so we identify the component from that rather than guessing.
What warranty comes with the part?
Ninety days on everything, with no categories to work around. Genuine or aftermarket, electrical or mechanical, stocked or ordered, the term is the same and the date is on your receipt.
Is the aftermarket version worth buying?
For most mechanical components, yes, and it costs noticeably less. Elements, thermostats, belts, hoses and capacitors are supplied that way as a matter of routine. For control boards and sealed refrigeration parts we usually point people at the genuine item, and we will tell you which we would fit ourselves.
Can you get parts for an older machine?
Frequently. Between the supplier network and the aftermarket range, a good many older appliances are still supported after the manufacturer has stopped making the original component. Send the model number and we will check properly.
How soon can I collect?
Same day for anything we hold, once we have confirmed it fits. For ordered components we give an honest estimate and call it an estimate, because supply dates still move and a promise we cannot keep is no use to you.
Do you supply repair businesses working around Stony Plain?
Yes. Trade accounts are available to appliance service companies and to property management firms, which means account pricing instead of retail. Call 780-498-7273 and we will arrange it.
What if the part costs more than the appliance is worth?
We will tell you. The appliance store shares the building with the parts desk, so you can price the component and the replacement in the same conversation and decide with both numbers in front of you.