W11044559 - Genuine OEM Whirlpool Washer Pressure Switch Hose

W11044559 – Genuine OEM Whirlpool Washer Pressure Switch Hose

The W11044559 Genuine OEM Whirlpool Washer Pressure Switch Hose is a factory-original replacement component designed for Whirlpool washing machines and compatible brands within the Whirlpool family. This critical hose connects the washer tub to the pressure switch, enabling accurate water level detection during wash cycles.

Available from Appliance Kingdom, a trusted Canadian appliance parts supplier based in Edmonton, AB, this part is stocked for fast Canada-wide shipping. Replacing a damaged or worn pressure switch hose is a common and effective fix for water level sensing issues, overfilling, and cycle malfunctions.

What the Washer Pressure Switch Hose Does

The pressure switch hose plays a vital role in your washer’s water level control system. It connects the bottom of the washer tub to the pressure switch and transmits air pressure signals that correspond to the water level inside the drum.

As the water level rises, air pressure inside the hose increases, allowing the pressure switch to determine when to stop filling and proceed with the wash cycle.

Using a Genuine OEM Whirlpool hose ensures the correct diameter, flexibility, and airtight seal required for precise pressure readings. Even small defects or incorrect sizing can lead to inaccurate water level detection and poor washer performance.

Why This Part Matters

If the pressure switch hose becomes cracked, blocked, loose, or worn, the washer may no longer correctly sense water levels. This can result in:

• Overfilling or continuous filling cycles

• Washer not filling enough water

• Cycle interruptions or failure to advance

• Water leaks or internal air pressure loss

A properly functioning hose is essential for safe operation, water efficiency, and consistent washing performance.

Common Symptoms of a Faulty Pressure Switch Hose

Replacing the W11044559 washer pressure switch hose can resolve issues such as:

• Washer won’t stop filling with water

• Washer overflows or fills excessively

• Incorrect water levels during cycles

• Washer fails to start or complete cycles properly

• Water leakage from a cracked or damaged hose

• Unusual noises caused by loose or misrouted hose

These symptoms are commonly linked to pressure sensing problems, and replacing the hose is often a straightforward and effective repair.

Compatibility Guidance

The W11044559 pressure switch hose is designed for use in Whirlpool washers and is compatible with several brands manufactured by Whirlpool, including Maytag, KitchenAid, Amana, and Kenmore.

To ensure proper fit, always verify your washer’s model number before ordering. This helps avoid compatibility issues and ensures optimal performance after installation.

Replaces Part Numbers

Verified from authoritative parts suppliers, the W11044559 replaces the following part numbers:

• W10251962

• W10509002

• W10525781

• W10723823

• W10724762

• WPW10525781

Key Features & Benefits

• Genuine OEM Whirlpool part for exact fit and reliability

• Designed for accurate water level pressure sensing

• Durable, flexible hose construction for long-term performance

• Maintains airtight connection between tub and pressure switch

• Meets original manufacturer specifications

• Suitable for homeowners, landlords, and professional technicians

Installation Overview

Replacing the W11044559 pressure switch hose is typically a moderate DIY repair:

1. Disconnect power and water supply to the washer

2. Access the top or rear panel of the washer

3. Locate the hose connecting the tub to the pressure switch

4. Remove the old hose and install the new one securely

5. Ensure proper routing to avoid kinks or rubbing

6. Reassemble and test the washer

Many experienced DIY users can complete this repair. However, if you are unfamiliar with appliance repairs, professional installation is recommended.

Canada-Wide Availability & Trusted Supplier

Appliance Kingdom is a Canadian-based supplier providing:

• Fast shipping across Canada

• Genuine OEM and high-quality replacement parts

• Reliable service for homeowners and appliance repair professionals

• Products compatible with Canadian appliance standards

Buyer Confidence & Support

With the W11044559 Genuine OEM Whirlpool Washer Pressure Switch Hose, you get:

• Guaranteed OEM quality and compatibility

• Reliable performance and accurate water level sensing

• Long-lasting durability compared to aftermarket alternatives

Need help confirming compatibility? Appliance Kingdom’s support team is available to assist before you order.