HS64 - Genuine OEM Ideal-Tridon Vent Clamp - 4" Diameter

HS64 - Genuine OEM Ideal-Tridon Vent Clamp - 4" Diameter

The HS64 Genuine OEM Ideal-Tridon Vent Clamp is a heavy-duty gear-style clamp designed for securing compatible hoses, ducts, vents, and other cylindrical connections. Ideal-Tridon HS64 is identified as a 1/2-inch-band hose clamp with a clamping range of approximately 3-9/16 inches to 4-1/2 inches, making it suitable for applications around a nominal 4-inch connection when the required outside diameter falls within the clamp's range.

This genuine Ideal-Tridon replacement clamp is suitable for homeowners, landlords, maintenance professionals, and appliance repair technicians who need a dependable clamp for a compatible vent or hose connection. Appliance Kingdom ships replacement parts across Canada from its Canadian operation, helping customers source quality components without relying on uncertain aftermarket specifications.

What Does the Ideal-Tridon HS64 Clamp Do?

The HS64 is a mechanical clamp used to secure a compatible hose, vent, or duct connection around its outside diameter. Its worm-gear design allows the clamp to be tightened around the connection to help maintain a secure fit.

Correct clamp sizing is important. A clamp that is too small may not fit around the connection, while one that is too large may not provide the intended clamping range. For this reason, the actual outside diameter of the connection should be measured before ordering.

The HS64 is listed with a 3-9/16-inch to 4-1/2-inch clamp range.

Common Signs a Vent or Hose Clamp Needs Replacement

A worn, damaged, loose, or incorrectly sized clamp can contribute to:

• A loose vent or hose connection

• Visible separation between connected components

• Air or exhaust leakage around a connection

• A connection that will not remain securely fastened

• Rust, deformation, or damage to the existing clamp

• Difficulty maintaining proper tension around the hose or vent

If the existing clamp is damaged or can no longer maintain a secure connection, replacing it with a correctly sized clamp can restore the mechanical connection. However, the clamp should be inspected along with the hose, vent, duct, or fitting itself to determine whether another component is responsible for the problem.

Will Replacing the HS64 Fix My Problem?

If the problem is caused by a damaged, loose, or incorrectly sized clamp, replacing the clamp can resolve the connection issue.

Before ordering, measure the outside diameter of the connection and confirm that it falls within the HS64's specified 3-9/16-inch to 4-1/2-inch clamping range.

If the hose, vent, duct, or fitting itself is cracked, damaged, or improperly sized, replacing only the clamp will not correct the underlying problem.

Compatibility & Sizing Guidance

The HS64 is a general-purpose Ideal-Tridon gear clamp rather than an appliance-model-specific replacement part.

For proper fit:

• Measure the outside diameter of the hose, vent, or duct connection.

• Confirm that the measured diameter falls within the HS64's 3-9/16-inch to 4-1/2-inch clamping range.

• Check the physical dimensions and clamp style against the original component.

• Do not order based solely on a nominal "4-inch" connection size.

The HS64 is listed by Ideal-Tridon distributors as a universal-fit gear clamp, and authoritative reference information identifies the HS64 size range.

Key Features & Benefits

• Genuine OEM Ideal-Tridon clamp

• Part number: HS64

• Gear-driven tightening mechanism

• 1/2-inch band design

• Approximate clamping range: 3-9/16 inches to 4-1/2 inches

• Suitable for compatible hose, vent, and duct connections

• Allows adjustable tightening for a secure mechanical connection

• Designed for reliable everyday service

• Suitable for homeowners, landlords, maintenance professionals, and appliance technicians

Installation Overview

Installation is generally straightforward when the correct clamp size has been selected.

Position the HS64 around the compatible hose, vent, or duct connection and tighten the worm-drive mechanism until the connection is securely held. Avoid excessive tightening, which can damage flexible hose or distort the connection.

For appliance-related venting or exhaust applications, disconnect the appliance from its power source before performing maintenance and follow the appliance manufacturer's service instructions.

Professional installation is recommended when the clamp is being used as part of a critical exhaust, combustion, gas, or other safety-related system.

Canada-Wide Availability & Appliance Kingdom Support

Appliance Kingdom is a Canadian appliance-parts supplier based in Edmonton, Alberta, serving customers across Canada.

The HS64 Ideal-Tridon clamp is available for Canadian customers who need a replacement or maintenance clamp for a compatible hose, vent, or duct connection. Appliance Kingdom supports homeowners, landlords, property managers, and professional appliance technicians throughout Canada.

Buyer Confidence

The HS64 is an Ideal-Tridon branded gear clamp with documented sizing information from industrial parts distributors and clamp reference data. Its specified 3-9/16-inch to 4-1/2-inch range provides a clear sizing reference when selecting a clamp for a nominal 4-inch connection.

For additional fit confidence, compare your existing clamp and measure the outside diameter of the connection before ordering.