HS10 - Genuine OEM Fairview Gear Clamp, 1/2" to 1-1/16"

HS10 - Genuine OEM Fairview Gear Clamp, 1/2" to 1-1/16"

The HS10 Genuine OEM Fairview Gear Clamp is a standard worm-gear hose clamp designed for securing compatible hoses and tubing with outside diameters from 1/2" to 1-1/16". The clamp features a 1/2"-wide stainless steel band and housing with a plated steel screw, providing dependable clamping for a wide range of appliance installation and plumbing applications. Reliable Parts and AMRE Supply both list HS10 as a Fairview Gear Clamp in this size range.

Available from Appliance Kingdom, a Canadian appliance parts supplier serving customers across Canada, the HS10 is a practical replacement when an existing hose clamp is damaged, corroded, loose, or no longer provides a secure connection.

Function & Importance of the HS10 Gear Clamp

The HS10 uses a worm-gear adjustment mechanism to tighten the stainless steel band around a compatible hose or tubing connection. Turning the screw adjusts the band diameter, allowing the clamp to apply pressure around the hose and help maintain a secure connection.

Reliable Parts specifies the HS10 for applications including heater hose and water hose, while AMRE Supply categorizes it within Fairview plumbing hose and tubing products.

Using the correct clamp size is important. A clamp that is too large may not tighten securely, while an incorrectly sized clamp can damage the hose or fail to maintain a reliable seal.

Common Signs Your Hose Clamp Needs Replacement

A worn or damaged hose clamp may contribute to:

• Hose connections that do not remain securely tightened

• Water or fluid leakage around a hose connection

• A loose hose connection

• Corrosion or deterioration of the existing clamp

• A damaged or stripped adjustment screw

• A clamp that cannot maintain sufficient tension

• A hose that slips or moves at the connection point

Replacing a defective clamp can restore secure hose retention when the clamp itself is the cause of the problem. If leakage continues after replacement, inspect the hose, fitting, and connection for additional damage.

Will Replacing the HS10 Fix My Problem?

If the problem is caused by a loose, damaged, corroded, or incorrectly functioning hose clamp, replacing it with the correctly sized HS10 can provide the required clamping force.

The HS10 has a specified clamping range of 1/2" to 1-1/16". Confirm that the outside diameter of the hose or tubing falls within this range before ordering.

A leaking hose connection may also be caused by a damaged hose, fitting, or other component, so replacing the clamp alone will not correct every type of leak.

Compatibility & Ordering Guidance

The HS10 is a general-purpose Fairview gear clamp rather than an appliance-model-specific component.

Before ordering, measure the outside diameter of the hose or tubing where the clamp will be installed. The required diameter must fall within the HS10's 1/2" to 1-1/16" clamping range.

The HS10 is listed by Canadian appliance-parts suppliers for applications associated with appliance installation and plumbing components, including washer and dishwasher installation parts.

Replaces Part Numbers

Reliable Parts lists the following replacement/interchange numbers for HS10:

• 21461

• 43257

• 5210

• F064154002

• HC10

• MA-5410BX

These replacement references are listed by Reliable Parts for the HS10 Fairview Gear Clamp.

Key Features & Benefits

• Genuine OEM Fairview gear clamp

• Part number: HS10

• Clamping range: 1/2" to 1-1/16"

• Standard worm-gear clamp design

• 1/2"-wide band

• Stainless steel band and housing

• Plated steel adjustment screw

• Designed for securing compatible hoses and tubing

• Suitable for a variety of appliance installation and plumbing applications

• Useful for homeowners, landlords, maintenance professionals, and appliance technicians

• Available through Canadian appliance-parts suppliers

Installation Overview

Installing a gear clamp is generally a straightforward repair or maintenance task. Position the clamp over the hose connection and tighten the adjustment screw until the hose is held securely against the fitting.

Do not overtighten the clamp. Excessive tightening can damage the hose or fitting, particularly when working with softer tubing or plastic components.

For water-connected appliances, shut off the appropriate water supply before servicing the connection. If you are unsure about the correct installation or the hose connection is difficult to access, professional appliance service is recommended.

Canada-Wide Availability & Appliance Kingdom Support

Appliance Kingdom is a Canadian appliance parts supplier serving homeowners, landlords, property managers, maintenance professionals, and appliance technicians across Canada.

The HS10 is a commonly used Fairview gear clamp available through Canadian appliance-parts distribution channels. AMRE Supply and Reliable Parts both list the HS10 as a Fairview Gear Clamp with the 1/2" to 1-1/16" size specification.

Appliance Kingdom provides Canada-wide shipping and support to help customers identify the correct replacement part for their appliance repair or installation needs.

Buyer Confidence

The HS10 is identified by Canadian appliance-parts suppliers as a Fairview Gear Clamp with a defined 1/2" to 1-1/16" clamping range. Its stainless steel band and housing provide a durable construction suited to compatible hose and tubing applications.

For the best fit confidence, measure the outside diameter of your hose or tubing and compare it with the HS10's specified range before purchasing.